Javítás: Az alkalmazás nem tudott megfelelően elindulni 0xc0000005

A Windows 10 a Microsoft egyik legjobban várt verziója. Bár a Windows 8 új trendet hozott létre az asztali operációs rendszerek világában, a tervezés és a teljesítmény terén néhány probléma merült fel, amelyek a Microsoft számára a Windows 10 rendszerben a fő hangsúlyt kapták. Tehát a Windows 10 Final Build 2015. július 29-én jelent meg, a Desktop as számára valamint az okostelefonok.

Sok módosítást tartalmazott, figyelembe véve a Windows 8 hibáit. Valójában ez a Windows fejlett verziója, de mégis számos következmény jelentkezik nap mint nap különböző felhasználóknál.

E következmények jelentős részét azok a hibák jelentik, amelyek egy adott feladat végrehajtásakor jelentkeznek. Sok ember hibaüzenetet kapott, miközben megpróbált különböző szoftvereket és böngészőket megnyitni a Windows 10 rendszeren belül. Ez a hiba egy hibaüzenettel jár, amely azt mondja, hogy az alkalmazás nem tudott megfelelően elindulni (0xc0000005). Kattintson az OK gombra az alkalmazás bezárásához . Ez a hiba általában az internetes böngészőknél fordul elő, de nem korlátozódik ezekre. A Windows belsejében lévő bármely alkalmazás leállíthatja a válaszadást e hiba miatt. Tehát meg kell javítani annak érdekében, hogy ezek az alapvető szoftverek újra működjenek.

2016.11.12 .: A felhasználók arról számoltak be, hogy az alább felsorolt ​​módszerek működni fognak a Windows 7 rendszeren is.

A Windows 10 0xc0000005 hiba oka:

Számos ismert oka van annak, hogy ez a hiba megzavarja a különböző szoftverek működését a Windows 10 rendszerben. Az egyik fő oknak tekinthető ok egy harmadik féltől származó víruskereső program, amely konfliktusokat okoz a futtatható fájlokkal és befolyásolja azok működését. Másrészt a nyilvántartások megsérülhetnek a rosszindulatú programok és vírusok miatt, amelyek a programok rendellenes viselkedését okozhatják. Előfordulhat, hogy a hibás hardver illesztőprogramok is hibásak .

Megoldások a Windows 10 0xc0000005 számú hiba kijavítására:

A fent említett okok alapján a megoldások egyértelműek. Tehát végezze el a következő módszereket, hogy megszabaduljon ettől a bosszantó hibaüzenettől.

Javítsa meg a sérült rendszerfájlokat

Töltse le és futtassa a Restorót a sérült és hiányzó fájlok átkutatásához és helyreállításához innen , ha végzett, folytassa az alábbi megoldásokkal. Az alábbi megoldások folytatása előtt fontos megbizonyosodni arról, hogy az összes rendszerfájl sértetlen és sérült.

1. módszer: A víruskereső program javítása

A víruskereső programok számos program futtatható fájljait befolyásolhatják. Tehát a probléma megoldásához le kell tiltania a harmadik féltől származó víruskereső programot annak ellenőrzésére, hogy ez volt-e a tettes vagy sem. Felhívjuk figyelmét, hogy a víruskereső programok letiltása komoly veszélyeket jelenthet a számítógépre, amikor csatlakozik az internethez.

A Windows saját biztonsági szoftverére, azaz a Windows Defenderre is támaszkodhat . Ugyanolyan funkcionalitással rendelkezik, mint bármely más víruskereső. A víruskeresőt letilthatja, ha a Beállítások oldalra lép, és kikapcsolja a pajzsot.

0xc0000005-1

Miután letiltotta, ellenőrizze újra a hibát. Ha továbbra is fennáll, lépjen a következő módszerre.

2. módszer: A nyilvántartások javítása

A rendszerleíró adatbázis a Windows központi adatbázisa, amelyet a számítógépe folyamatosan használ, hogy segítsen elolvasni a futtatásához szükséges különféle fájlokat és beállításokat. A nyilvántartások megsérülhetnek egyes fájlok károsodásának következtében, amelyek szükségesek ahhoz, hogy mindent a helyükre rakjanak. Ezért a legtöbb szakértő javasolja, hogy készítsen biztonsági másolatot a rendszerleíró adatbázisról, és ezt a biztonsági másolatot egy hagyományos USB-memóriakártyán tárolja, hogy korrupció esetén az előző állapotban felélessze a rendszerleíró adatbázist. De, ha nem készített biztonsági másolatot a rendszerleíró adatbázisáról, kövesse ezeket a lépéseket a beállításjegyzék kijavításához a 0xc0000005 hiba elhárításához .

1. Töltse le a rendszerleíró adatbázis-tisztító szoftvert erről a linkről .

2. A letöltés után telepítse az ajánlott beállításokkal. A telepítés befejezése után nyissa meg a szoftvert.

3. A felületen kattintson a bal oldali ablaktáblán található Registry fülre, és kattintson a Scan for Issues feliratú gombra . Elkezdi keresni a hibákat a rendszerleíró adatbázisban, és amikor a keresés befejeződik, aktiválódik a Kijavított probléma javítása gomb . Kattintson erre a gombra, és minden javításra kerül.

0xc0000005-2

3. módszer: A hibás illesztőprogramok javítása

Az illesztőprogramok azok a szoftverprogramok, amelyek segítik a számítógépet a hozzá csatlakoztatott hardverrel való kommunikációban. Tehát, ha megsérülnek, a hardver általában hibákat okoz . Ezeknek a hibás búvároknak a javítása számos módon segíthet. Kövesse az alábbi lépéseket.

1. Nyissa meg az Eszközkezelőt a Win + X megnyomásával, és válassza ki a listából.

2. Az Eszközkezelőben görgessen lefelé, hogy megnézze, van-e olyan sárga jelöléssel ellátott hardver. Ha van, kattintson jobb gombbal oda, és válassza az Illesztőprogram frissítése lehetőséget . Ha nemrég telepítette az illesztőprogramokat, telepítse azokat is.

0xc0000005-3

3. Az utána megjelenő ablakban kattintson a Frissített illesztőprogram keresése automatikus keresésre, hogy lehetővé tegye az illesztőprogramok automatikus keresését és telepítését. Abban az esetben, ha manuálisan töltötte le az illesztőprogramokat, kattintson az alábbi lehetőségre a böngészéshez és a telepítéshez. A folyamat befejezése után ellenőrizze a hibát.

0xc0000005-4

4. módszer: Javítsa ki a BCD-t

Ezt a módszert a felhasználók saját felelősségükre hajtják végre. Ez némelyiknek bevált, egyeseknek nem. Az ebben az útmutatóban szereplő lépések végrehajtása után újból aktiválnia kell a Windows rendszert.

  1. Tartsa lenyomva a Windows billentyűt és nyomja meg az X gombot . Válassza a Parancssor (rendszergazda) lehetőséget
  2. Írja be a „ bcdeditszót, és nyomja meg az ENTER billentyűt. Ha a Windows rendszerbetöltő elérési útja xOsload.exe, akkor el kell távolítania néhány fájlt, és meg kell javítania a BCD-t. Ezt a PATH mezőben láthatja, miután végrehajtotta a „ bcdedit” parancsot.
  3. Ha elkészült, hajtsa végre az alábbi parancsokat, néhány előfordulhat, hogy nem található, de figyelmen kívül hagyja a hibákat, és az utolsóig halad. Győződjön meg róla, hogy minden parancs után megnyomta az ENTER billentyűt.
Del D: \ Windows \ System32 \ xOsload.exe Del D: \ Windows \ System32 \ xNtKrnl.exe Del D: \ Windows \ System32 \ Drivers \ oem-drv64.sys attribútum c: \ boot \ bcd -h -r -s ren c: \ boot \ bcd bcd.old bootrec / rebuildbcd

5. módszer: A Windows Frissítések keresése

A Windows frissítések gyakran tartalmaznak hibákat és hibákat, de ezek arról is híresek, hogy helyet adnak az emberek számítógépeinek új problémáinak. Ebben a lépésben azonban ellenőrizzük az operációs rendszer esetleges frissítéseit, mert a Microsoft gyakran javítja a frissítésekből származó problémákat. Ehhez kövesse az alábbi útmutatót.

  1. A Windows beállításainak megnyitásához nyomja meg a „Windows” + „I” gombot .
  2. A beállításokban kattintson a „Frissítések és biztonság” lehetőségre, majd a bal oldalon válassza a „Windows Update” lehetőséget.
  3. A következő képernyőn kattintson a „Frissítések keresése” lehetőségre, és ez automatikusan felszólítja a Windows-t, hogy ellenőrizze az elérhető frissítéseket.
  4. A frissítés ellenőrzésének befejezése után kattintson a „Letöltés” gombra az új frissítések letöltésének és telepítésének elindításához a számítógépen.
  5. A frissítések telepítése után ellenőrizze, hogy ezzel megoldotta-e a problémát a számítógépen.

6. módszer: A számítógép visszaállítása

Ha most kezdte el észlelni ezt a problémát, előfordulhat, hogy hibás illesztőprogram-telepítés vagy akár egy olyan szélhámos alkalmazás miatt vált be, amelyet a közelmúltban telepített a számítógépére. Ezért ebben a lépésben visszaállítjuk a számítógép állapotát egy korábbi dátumra, és remélhetőleg ezt meg kell oldanunk, ha a fent említett okok miatt történt. Ennek érdekében:

  1. Nyomja meg a „Windows” + „R” gombot a Futtatás parancs megnyitásához.
  2. Írja be az „rstrui” szót, és nyomja meg az „Enter” gombot a visszaállítás-kezelő ablak megnyitásához.Futtatás párbeszédpanel: rstrui
  3. Kattintson a „Next” gombra és jelölje be a „Show more Restore Points” opciót.
  4. Válasszon egy visszaállítási pontot a listából, amely a kérdés megjelenésének dátuma előtt van.
  5. Kattintson újra a „Next” gombra, és kövesse a képernyőn megjelenő utasításokat, hogy minden visszatérjen a kiválasztott dátumhoz.
  6. A visszaállítás befejezése után ellenőrizze, hogy a probléma továbbra is fennáll-e.

7. módszer: A tűzfal engedélyezése

Bizonyos esetekben előfordulhat, hogy a hibát azért váltják ki, mert az alkalmazás gyanús, vagy legalábbis akkor, ha gyanúsnak minősítették, és a Windows tűzfal nem fut a számítógépén a gyanús ellenőrzéséhez. Ezért ebben a lépésben megbizonyosodunk arról, hogy a Windows tűzfal engedélyezve van-e a hiba megszabadulása érdekében. Azért:

  1. Nyomja meg a „Windows” + „R” gombot a Futtatás parancs megnyitásához.
  2. Írja be a „Vezérlőpult” parancsot, és nyomja meg az „Enter” gombot a klasszikus Vezérlőpult felület elindításához.
  3. In the Control Panel, click on the “ViewBy:” option and select the “Large Icons” button.
  4. After making this selection, click on the “Windows Defender Firewall” option to launch the Firewall and then select the “Turn Windows Defender Firewall On or Off”.
  5. Make sure to check the “Turn on Windows Defender Firewall” for both the available options to turn the Firewall on.
  6. After making this selection, save your changes and close out of the Window.
  7. After doing so, check to see if the issue still persists.

Method 8: Run SFC Scan

In some situations, you might’ve installed a bad driver on your computer or at some point, due to a storage failure, some system files or drivers might’ve been corrupted. Therefore, in this step, we will be running a complete system scan to identify any drivers that are missing signatures or to fix any abnormalities in the system files. For that:

  1. Press “Windows’ + “R’ to open the Run prompt.
  2. Type in “cmd” and then press “Shift’ + “Ctrl” + “Enter” to provide admin permissions.Running the Command Prompt
  3. Type in the following command inside the command prompt and press “Enter” to execute it.
    sfc /scannow
  4. Let the computer scan for any broken or corrupted items and it should automatically replace them with working ones.
  5. Check to see if doing so fixes the error message.

Method 9: Disabling Data Execution Prevention

Data Execution Prevention is a program that prevents certain programs or executables from being able to run on your computer because it suspects that they might be viruses. Due to this prevention, sometimes, as a false alarm, legit applications might also face issues while trying to run on your computer. Therefore, in this step, we will be disabling this setting from the system configuration panel. For that:

  1. Press ‘Windows’ + “R’ to open the Run prompt.
  2. Type in “Control Panel” and press “Enter” to launch the classical control panel interface.
  3. Inside the Control Panel, click on the “View By:” icon and then select the “Large Icons” option.
  4. After selecting Large Icons, select the “System” option.
  5. Click on the “Advanced System Settings” option on the left side of the screen.
  6. In the advanced System Settings, click on the “Advanced” tab from the top.
  7. In the advanced tab, click on the “Settings” option under the “Performance” heading.Válassza a Beállítások lehetőséget
  8. On the next window that opens up, click on the “Data Execution Prevention” tab, and then select the “Turnon DEP for all programs except thoseI Select” option.
  9. After that, click on the “Add” option and point to the executable of the application that you are facing issues with.
  10. This way, that application will no longer come under the jurisdiction of the DEP program.
  11. Check to see if doing so has fixed the issue.

If the above process is unable to fix the issue, it might be because the executable isn’t the only one being affected by the DEP program. Sometimes the DEP might actually be preventing a herd of executables from being run on the computer and to counter this we will be disabling DEP completely.

Disabling DEP completely cannot be done through any Windows setting and it needs to be done manually through the command prompt. Remember to take this step as a last resort because this can in some cases makes your computer more vulnerable to viruses and malware attacks. In order to disable DEP through the command prompt:

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Inside the Run prompt, type in “cmd” and then press “Shift” + “Ctrl” + “Enter” to launch in admin mode.
  3. Inside the command prompt, type in the following command and press “Enter” to execute it on your computer.
    bcdedit.exe /set {current} nx AlwaysOff
  4. Once the command has been executed, run the application that you want to and check to see if the error message still persists.

Method 10: Disable Firewall and Windows Defender

In some situations, the executable that you want to run on the computer might actually be blocked by the Firewall and it would not be able to make contact with its servers this way. Therefore, we will have to allow the executable in our Firewall for both public and private networks which should get it working if the Firewall is preventing it.

In addition to that, sometimes the Windows Defender might prevent the application from running on your computer because its local files might be suspicious and not properly signed. This can be due to a false alarm as well so we will be disabling the Windows Defender for the application as well by adding an exclusion. In order to do that:

  1. Press “Windows” + “R” to launch the Run prompt.
  2. Type in “ControlPanel” and press “Enter” to launch the classical control panel interface.
  3. Click on the “View by:” button, select “Large Icons” and then click on the Windows Defender Firewall option.
  4. Select the “Allow an app orfeature through the Firewall” button on the left pane and then click on the “Change Settings” button and accept the prompt.Kattintson egy alkalmazás vagy szolgáltatás engedélyezése a Windows Defender tűzfalon keresztül
  5. From here, make sure that you check both the “Public” and the “Private” options for the application and its entries.
  6. Save your changes and exit out of the window.
  7. After that, press “Windows” + “I” to launch the settings and click on the “Updateand Security” option.
  8. From the left pane, click on the “Windows Security” button and then click on the “Virus and Threat Protection” button.
  9. Select the “Manage Settings” button under the Virus and Threat Protection Settings heading.
  10. Scroll down and click on the “Add or Remove Exclusions” button in the next window.
  11. Click on the “Add an Exclusion” option and select “Folder’ from the File type.
  12. Make sure to specify the application’s folder with which the issue is occurring and exit out of this window after saving your changes
  13. Check and see if doing so has fixed the error message.

Method 11: Reinstall Firefox

If you are getting this error while trying to launch Firefox, it might be occurring because the applications haven’t been installed properly on your computer. Therefore, in this step, we will be launching the app management window and uninstalling Firefox after which we will reinstall it completely by downloading it from the Firefox website. For that:

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “appwiz.cpl” and press “Enter” to open the app management window.
  3. In the app management window, scroll down and right-click on the “Firefox” application.
  4. Select “Uninstall” from the list and then follow the on-screen instructions to remove the software from your computer.
  5. Repeat this step for all instances and bundled applications of the software installed on your computer.
  6. Make sure to disable any third-party antiviruses at this point to make sure that the software is installed smoothly.
  7. Head on over to the Mozilla website and click on the download button.
  8. Click on the downloaded executable and install it on your computer following the on-screen instructions.
  9. Check to see if doing so has fixed the error message on your computer.

Method 12: Scanning for Malware

It is possible in some cases that the computer has acquired malware that is preventing the user from being able to run all the system functions on their computer. Therefore, in this step, we will be using the default Windows Defender to scan our computer thoroughly for any viruses or malware that might’ve found its way on our computer. For that:

  1. Press the “Windows” + “I” keys simultaneously on your PC to open the Settings tab.
  2. Navigate to the Update& Security option and then click on the “Windows Security” button on the left tab.
  3. After that, click on the “Open Windows Security” and select the “Virus and Threat Protection” option.
  4. After that, click on the “Scan Options” button below the “Quick Scan” window.
  5. Click on the “Full Scan” option and then hit the button of “Scan Now”.
  6. Wait for a few seconds while this process gets completed and then finally check if the error gets resolved now.

Microsoft Security Scanner is an additional tool that you can use to test the system for any further viruses and malware because sometimes the default tool isn’t able to perform the scan properly. Therefore, in this step, if the issue still hasn’t been resolved, we will be using the Microsoft Security Scanner to further make sure for any issues.

  1. Launch your browser and download the Microsoft Security Scanner from here.
  2. After downloading the executable, run it on your computer and let it install.
  3. Accept the License Agreement terms and click on “Next”.
  4. Select “Full Scan” and click on “Next”.
  5. After you opt for a full scan, the software will start scanning your entire computer to look for any malware or viruses that might’ve disguised themselves as normal executables or applications.
  6. After this scan has been finished, check to see if the error message still persists.

Method 13: Install Missing Drivers

It is possible in some situations that your device is missing certain drivers due to which this particular issue is being triggered on your computer. Therefore, we will be checking for any missing drivers and then we will check to see if the error is fixed. In order to do this, follow the guide below.

  1. Download Driver Easy on your computer.Letöltés Driver Easy
  2. Run the downloaded executable and install the software on your computer.
  3. Run the check and see if there are any missing drivers on your computer.
  4. Install these missing drivers and then install them either manually or automatically using the Software.
  5. After installing all the missing drivers, check to see if the issue still persists.

Method 14: Reconfigure Registry

It is possible that in some cases, you haven’t properly configured all the registry settings or that you unknowingly configured something incorrectly. Therefore, in this step, we will be reconfiguring our Registry to fix a certain key that sometimes, if misconfigured, causes this particular error on Windows. In order to do this, follow the guide below.

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “regedit” and press “enter” to launch the registry editor.
  3. Inside the registry editor, navigate to the following location.
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
  4. Double click on the “LoadAppInit_DLLs” entry on the right side of the screen.
  5. Change the value of this registry from “1” to “0”.
  6. Save your changes and exit the registry editor.
  7. Check to see if doing so has fixed the error.

Method 15: Update Disk Drivers

In some cases, the Disk Drivers that are being used to control your Storage and other Disks installed on the computer might have been outdated due to which the error is being triggered. Therefore, in this step, we will first be opening the Device Management Window and from there, we will be updating these drivers. In order to do so, follow the steps mentioned below.

  1. Press “Windows’ + “R” to open the Run prompt.
  2. Type in “Devmgmt.msc” and press “Enter” to launch the device management window.
  3. In the Device Manager, double click on the “DiskDrives” option to expand it.
  4. Right-click on the storage device listed and select the “Update Driver” option.
  5. Select the “Search Automatically for Drivers” option and let the setup search.
  6. If there are any drivers available, Windows will automatically check for them and install them on your computer.
  7. Check to see if doing so has fixed the issue.

Method 16: Disabling Automatic Updates and Uninstalling Updates

It is possible in some cases, that this error is stemming from a faulty update install. Microsoft is notorious for pushing out updates that aren’t properly customized to work for all hardware combinations and often go on to break things instead of making them better. Therefore we will make sure that the recent update isn’t installed on our computer.

In order to do this, we will have to first disable automatic updates on our computer and then we will be uninstalling the recently installed updates. Make sure to back up any important data that you don’t want to lose just in case this goes bad.

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Type in “service.msc” and press “Enter”.
  3. Scroll through the list and double click on the “Windows Update” service.
  4. Click on the “Stop” button and then click on the “Startup Type” dropdown.
  5. Select “Disabled” from the list and select the “Apply” button from the window.
  6. Click on “OK” to close out of this window.
  7. Check to see if doing so has stopped your computer from updating.

After stopping the computer from updating, we will now be uninstalling the recent updates that have been installed on your computer. For that:

  1. Press “Windows” + “I” buttons to open the settings.
  2. In settings, click on the “Update and Security” option and then select the “Windows Update” button from the left pane.
  3. In the Windows Update, click on the “View Update History” option.
  4. In the Update History, click on the “Uninstall Updates” option and it should take you to the uninstallation screen where all the recently installed updates will be listed.
  5. From the list, right-click on the update that was installed recently and caused this error on your computer.
  6. Right-click on this update and select the “Uninstall” button to remove it completely from the computer.
  7. Follow through with the on-screen instructions.
  8. Check to see if uninstalling has fixed this issue.

Additional Fixes:

  • In addition to some of the recommendations given above, you should try to check if there are any bad memory modules (RAM) installed on your computer which can be a cause of this.
  • Győződjön meg arról is, hogy nem túlhúzta-e a RAM-ot az ajánlott határértéket meghaladó szintre. Ha ezt megtette, próbálja meg visszaállítani a gyári alapértékekre, és ellenőrizze, hogy ez megoldja-e a problémát.